| Customization: | Available |
|---|---|
| Displacement: | 87cc |
| Standard: | ISO, CE |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
ENGINE DISPLACEMENT:
|
87 ccm (5.3 cu. in.) | |
|
NUMBER OF CYLINDERS:
|
1 | |
|
CYLINDER BORE:
|
54 mm (2.12 in.) | |
|
PISTON STROKE:
|
38 mm (1.50 in.) | |
|
PISTON RING THICKNESS:
|
||
|
CYLINDER TYPE:
|
Aluminum with Chrome plated bore | |
|
INTAKE METHOD:
|
Piston ported | |
|
MANUFACTURER ADVERTISED H.P.:
|
6.1 (4.5 kW) | |
|
WEIGHT:
|
7.5 kg (16.3 lbs.), powerhead only | |
|
OPERATOR CONFIGURATION:
|
One Man operation | |
|
HANDLEBAR SYSTEM:
|
Anti-vibration | |
|
CHAIN BRAKE:
|
Inertia activated | |
|
CLUTCH:
|
Centrifugal | |
|
DRIVE TYPE:
|
Direct | |
|
CONSTRUCTION:
|
Die cast Magnesium, injection molded Polymer | |
|
MAGNETO TYPE:
|
Electronic SEM AM7 | |
|
CARBURETOR:
|
Tillotson HS-228A, B, C series | |
|
MAJOR REPAIR KIT:
|
RK-23HS | |
|
MINOR REPAIR KIT:
|
DG-5HS/T | |
|
AIR FILTER SYSTEM:
|
Nylon mesh cartridge | |
|
STARTER TYPE:
|
Automatic rewind | |
|
OIL PUMP:
|
Automatic | |
|
MAXIMUM ENGINE RPM:
|
12,500 max free after break in, 9,300 under load. | |
|
IDLE RPM:
|
2,500 | |
|
IGNITION TIMING:
|
fixed | |
|
BREAKER POINT SETTING:
|
none | |
|
FLYWHEEL/COIL AIR GAP:
|
0.30 mm (0.020 in.) | |
|
SPARK PLUG TYPE:
|
WSR7F/WS7F, BPMR7A, RCJ7Y | |
|
SPARK PLUG GAP:
|
0.50 mm (0.020 in.) | |
|
CRANKSHAFT MAIN BEARINGS:
|
Ball | |
|
FUEL TANK CAPACITY:
|
900 ml (30.4 fl. oz.) | |
|
FUEL OIL RATIO:
|
50:1 | |
|
RECOMMENDED FUEL OCTANE:
|
Regular grade | |
|
MIX OIL SPECIFICATION:
|
approved mix oil, | |
|
CHAIN PITCH:
|
3/8 in. | |
|
CHAIN TYPE:
|
73LG or LP | |
|
BAR MOUNT PATTERN:
|
17 link | |
|
SHORTEST GUIDE BAR SUPPLIED:
|
40 cm (16 in.) | |
|
LONGEST GUIDE BAR SUPPLIED:
|
91 cm (36 in.) |
The 288 is a large-scale chainsaw positioned in the heavy-duty machines for professional forestry work. With a magnesium crankcase for high r.p.m. resistance and a forged three-piece crankcase, these units are built to industrial standards. Effective vibration damping and an ergonomic grip with angled front handle make the 288 user-friendly even with its powerful engine. An intertia-activated chain brake helps minimize kickback hazards when cutting large material.
The 5.4-cubic-inch, two-cycle engine produces 6 horsepower and intense operating speeds up to 9300 r.p.m. The engine employs Smart Start technology for easy pull-starting.
Recommended bar length range is from 18 inches up to 28 inches. The cutting chain runs at 67.91 feet per second and has a 3/8-inch link pitch.
The 288 fuel capacity is 1.9 pints. Fuel is regular 87 octane gasoline mixed with two-cycle chain saw oil at a 25-35-to-1 ratio. The adjustable flow chain lubrication system holds 1.1 pints of standard chain saw oil.
The 288 chainsaw produces a vibration level at the front/rear handle of 6.2 and 6.9 m/s2 vibration units respectively. Sound level at the operator's ear is 100dB.
){kind=link}